What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 03:10

The third is lightning and “how it gets conducted into a home.”
For this case there are devices called Metal oxide varistors (MOV).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Can you provide some examples of music with a free form structure?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The MOV will conduct when the voltage exceeds 50% of line voltage.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Guy Hears Cries During Hailstorm — Then Saves An Entire Family - The Dodo - For Animal People
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then describes the function of a fuse.
This device then solves the entire problem.
Million-Dollar Project Aims to Expose Bad Medical Research - Gizmodo
He then asserts :
[old diagram got deleted by accident]
It also is a device that limits the change in current flow.
This is 'the assistant's answer'
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Who is the most annoying character in the Office?
This is where this question deviates from being a 'generic' question, and becomes more specific.
But it can get overloaded, and no longer works.
[image of Common-mode choke]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This one hit behind the barn.
In schematic diagrams this is the symbol for a fuse:
A circuit breaker is similar, but is resettable.
Treasury Secretary Busts ‘Alarmist’ Inflation Predictions - The Daily Wire
The other is “what does a “fuse” do?”
One is “what exactly is in a ‘surge protector’ ? ”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Stock Market News, June 3, 2025: Nasdaq Moves Higher; OECD Cuts U.S. Growth Outlook - WSJ
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
One
Because the load is inductive, the current lags the voltage.(by a bit).
When did you realize that your childhood was not normal?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
How is sex with a woman for gay men?
but I think this circuit , shows a few more pieces.
2024–10–14 [Omar Gharbi Omar Gharbi ]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
What kind of book did you write after turning 55?
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
eight
John Harbaugh on Aaron Rodgers: I don’t have a reaction, just respect - NBC Sports
2024–10–10[John johnson John Johnson ]
An AC voltage/ current source, and an ac inductive load.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
It seems Mohan does not understand the difference between a comment and an Answer.
What is lightning?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
He then describes Rainy Season and Lightning.
nine
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
I post the exact comment here.
The bolt then partially travels down the line to your home.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
what exactly is a ‘surge’ protector?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
the problem then depends on "how fast does the fuse operate?".
This is where the MOV conducts again, and dissipated the energy.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
There are two important concepts here.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–16 [ OO OLAOYE OYEBODE ]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
A fuse is a non-resetable over current circuit protector.
so, what happens?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Upvotes:
What does a fuse do?
Edit 2024–10.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
At least they know the answer if they wanted it.
(Dc diagram shown, AC is similar).
First Sentence:
a photo is worth a thousand words.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
There are three different concepts here that are getting confused.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
These are simplified answers to the original question, and does not change anything I wrote above.
but this device (an Inductor) … impedes the rapid changes in the current.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Here is a simplified AC power diagram.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
At one ohm, the resistor has a maximum of 1 watt power.
Barnstars: